Newbit releases new Bluetooth Low Energy 5 (BLE 5) Nordic nRF52832 modules XY-MBN32A and XY-MBN32B
XY-MBN32A and XY-MBN32B are robust, highly flexible, ultra low power Bluetooth® 5 modules based on Nordic® Semiconductor nRF52832 SoC solution, which has a 32bit Arm® Cortex™-M4 CPU with the floating-point unit running at 64MHz.
XY-MBN32A and XY-MBN32B modules are multiprotocol capable with full protocol concurrency. They support BLE® (Bluetooth Low Energy), including the high-speed 2 Mbps feature.
Bluetooth mesh can be run concurrently with Bluetooth LE, enabling smartphones to provision, commission, configure and control mesh nodes. NFC, ANT, and 2.4GHz proprietary protocols are also supported.
XY-MBN32A and XY-MBN32B have a small 21 x 13.38 x 2mm size with 29GPIOs of nRF52832QFAA (QFN48 package).
The differences between XY-MBN32A and XY-MBN32B are the antenna designs.
XY-MBN32A integrates a high-performance PCB antenna.
XY-MBN32B uses you.FL connector and requires an external 2.4Ghz antenna.
Key Features
- Bluetooth5
- 2Mbps
- CSA#2
- AdvertisingExtensions
- 512kB Flash and 64kBRAM
- Supports 1 Mbps and 2 Mbps Bluetooth LEmodes
- Sensitivity of -96 dBm for Bluetooth LE
- Wide supply voltage range: 1.7 V to 3.6V
- Full set of digital interfaces including SPI, 2-wire, I²S, UART, PDM, QDEC withEasyDMA
- 12-bit, 200kspsADC
- 128-bit AES ECB/CCM/AARco-processor
- RAM mapped FIFOs using EasyDMA
- Type 2 near field communication (NFC-A) tag with wakeup-on-field and touch-to-pair capabilities (P09 and P10)
- RAM mapped FIFOs using EasyDMA
- Individual power management for all peripherals
- On-chip DC/DC buck converter
- Small size: 21.0 x 13.8 x 2.3mm (with shield)
- 29GPIOs